TS250A - 330
- 10 in stock
TS250A-330
Brückenkopf - Tile cutting machine in professional aluminum design! Precise cut - easy transport - powerful
Extra-long bridge saw with 3,300 mm cutting length
The TS250A-330 is by far the largest bridge saw in the GÖLZ range and is specially designed for cutting large-format tiles and ceramic slabs using the wet cutting process.
The machine can be edited with up to eight side booms (accessories).
The TS250A-330 is available with or without automatic cutting feed.
| Cutting disc diameter | 250 mm (25.4 mm) |
| max. cutting depth | 60 mm |
| max. cutting length | 3,300 mm |
| Order number without automatic handwheel feed | 0289 250 5000 |
| Order number with automatic handwheel feed | 0289 250 5020 |
Technical data
| Motor | Electric motor, 230V 50Hz, IP54 |
| Performance | 1.3 kW |
| Max. cutting depth | 60 mm |
| Cutting disc diameter | 250 mm |
| drilling | 25.4 mm |
| Cutting length | 3300 mm |
| Cutting shaft speed | 2,800 rpm |
| Miter cut | Yes |
| feed | Manual feed |
| water pump | S2, 230 V, 50 Hz, 55 watts |
| Flange diameter | 60 mm |
| Transport wheels | Yes |
| Cutting table (LxW) | 1300 × 490 mm |
| Dimensions (LxWxH) | 1640×540×1299 mm |
| Weight | 72 kg |
| Order number | 0289 250 1100 |
Accesories
| side boom (500×600mm) | 0289 250 9017 | |
| Replacement water pump with plug | 0289 400 9002 | |
| T-Lock tile clamping device (Tile Locking System | 0289 250 9018 | |
| Tile stop 1m | 0289 250 9019 |
ACCESSORIES
GÖLZ GmbH
Dommersbach 51
53940 Hellenthal
Germany
info@goelz.de
GÖLZ WEE Reg. No.: DE11935769
- General safety precautions
Make sure the machine is stable on a firm and level surface to prevent it from tipping over during operation.
Allow only qualified personnel to operate the device. Improper operation may result in serious injury.
- Danger from rotating parts
Never touch the rotating diamond cutting disc during operation. Risk of injury from sharp edges and high speed.
When cutting, always use a push stick or similar aid to keep your hands away from the disc.
- Eye and hearing protection
Always wear safety goggles to protect your eyes from flying particles.
Use hearing protection as the machine produces noise levels that can damage your hearing.
- Dust and particle protection
Only operate the machine in well-ventilated areas. The dust generated during use can be harmful to your health.
Wear a respirator to avoid inhaling dust particles.
- Electrical safety
Before each use, check the power supply and cable for visible damage.
Use only tested and intact cables and sockets with earthing.
Keep electrical connections dry and free from moisture.
- diamond cutting disc
Use only diamond cutting blades that are suitable for the machine and in good condition. Damaged blades can break and cause serious injury.
Check the cutting disc regularly for wear or damage. Replace damaged or worn discs immediately.
- Clothing and personal protective equipment (PPE)
Do not wear loose clothing, jewelry, or loose hair that could be pulled into the machine.
Use cut-resistant gloves to protect yourself from injury when changing or cleaning the cutting disc.
- Child safety
Keep children and unauthorized persons away from the machine.
- Operation and maintenance
Turn off and unplug the machine before performing any maintenance or changing the cutting disc.
Carry out regular maintenance according to the manufacturer's instructions to ensure the safety and functionality of the machine.
- Emergency measures
Make sure that an emergency stop switch is within reach so that the machine can be switched off quickly in an emergency.
Keep a first aid kit and fire extinguisher near the workstation.
Generally:
Suitable use: Use the product only for its intended purpose.
Proper handling: Make sure you have sufficient knowledge and skills to use the product.
Protective clothing: Wear suitable protective clothing such as safety goggles, gloves and, if necessary, hearing and respiratory protection.
Work area: Ensure a safe and well-lit work area.
Children: Keep the product out of reach of children.
