Drill motor RX SL
- In stock, ready to ship
Drill motor RX SL
- Precise drilling results – up to Ø 1,000 mm thanks to double play-free drilling spindle
- The wide voltage range enables operation on
230 volt and 400 volt – 480 volt network - The machine stops immediately by electronic
Quick stop function - Integrated determination of the maintenance interval
- Up to 30% higher efficiency results in higher
Output power and higher torque - Longevity through the use of high-quality components
- The drives operate almost silently thanks to the integrated water cooling
- Ergonomic design with handy dimensions
Technical data
| Phases | 3~ | 1~ | ||
| Nominal voltage | 400 V / 480 V | 230 V | ||
| Rated power | 12,000 W | 3,700 W | ||
| Nominal frequency | 50-60 Hz | 50-60 Hz | ||
| Rated current | 32A | 16A | ||
| Rated speed | 0-100/0-180/0-250/0-480 rpm | 0-100/0-180/0-250/0-480 rpm | ||
| Rated torque | 1,500/830/600/300 Nm | 700/380/280/145 Nm | ||
| Core bit diameter | 1,000/600/250/120 mm | 600/350/250/120 mm | ||
| Tool holder | UNC 1 1/4", flange interchangeable | UNC 1 1/4", flange interchangeable | ||
| Cooling medium | Water | Water | ||
| Weight | 16.5 kg | 16.5 kg | ||
| Order number | B102429 | B102429 |
ACCESSORIES
GÖLZ GmbH
Dommersbach 51
53940 Hellenthal
Germany
info@goelz.de
GÖLZ WEE Reg. No.: DE11935769
- General safety precautions
Make sure the machine is stable on a firm and level surface to prevent it from tipping over during operation.
Allow only qualified personnel to operate the device. Improper operation may result in serious injury.
- Danger from rotating parts
Never touch the rotating diamond cutting disc during operation. Risk of injury from sharp edges and high speed.
When cutting, always use a push stick or similar aid to keep your hands away from the disc.
- Eye and hearing protection
Always wear safety goggles to protect your eyes from flying particles.
Use hearing protection as the machine produces noise levels that can damage your hearing.
- Dust and particle protection
Only operate the machine in well-ventilated areas. The dust generated during use can be harmful to your health.
Wear a respirator to avoid inhaling dust particles.
- Electrical safety
Before each use, check the power supply and cable for visible damage.
Use only tested and intact cables and sockets with earthing.
Keep electrical connections dry and free from moisture.
- diamond cutting disc
Use only diamond cutting blades that are suitable for the machine and in good condition. Damaged blades can break and cause serious injury.
Check the cutting disc regularly for wear or damage. Replace damaged or worn discs immediately.
- Clothing and personal protective equipment (PPE)
Do not wear loose clothing, jewelry, or loose hair that could be pulled into the machine.
Use cut-resistant gloves to protect yourself from injury when changing or cleaning the cutting disc.
- Child safety
Keep children and unauthorized persons away from the machine.
- Operation and maintenance
Turn off and unplug the machine before performing any maintenance or changing the cutting disc.
Carry out regular maintenance according to the manufacturer's instructions to ensure the safety and functionality of the machine.
- Emergency measures
Make sure that an emergency stop switch is within reach so that the machine can be switched off quickly in an emergency.
Keep a first aid kit and fire extinguisher near the workstation.
Generally:
Suitable use: Use the product only for its intended purpose.
Proper handling: Make sure you have sufficient knowledge and skills to use the product.
Protective clothing: Wear suitable protective clothing such as safety goggles, gloves and, if necessary, hearing and respiratory protection.
Work area: Ensure a safe and well-lit work area.
Children: Keep the product out of reach of children.
